0
<-- nev left start -->

Irrigation Accessories and Fittings

Showing 47 Items
ViewView
  1. Emitting Pipe Inline Lateral

    IT HAS UNIFORM AND ACCURATE WATER DISCHARGE.RESISTANCE TO ANY CHEMICAL MEDIUM.
    Send Inquiry
  2. Pvc Union Socket

    PVC Socket Union - Plain with EDPM seal as standard. Manufactured by GOKUL POLY VALVES PVT LTD. and available in a range of Metric sizes from PVC Plastics. If you require a size that is not listed, please contact us.
    Send Inquiry
  3. 3 ARM GARDEN NOZZLE

    This garden nozzle sprinkler head is made from engineering-grade thermoplastic with no metal parts to avoid corrosion. Wobbler heads provide extremely uniform coverage, even at lower pressures.
    Send Inquiry
  4. DRIP FITTING ELBOW

    The Drip Fittings Elbow is widely appreciated for their attractive attributes such as excellent finish, abrasion resistance and easy installation. Manufactured using graded PP material, these elbows are used for connecting pipes while installing the drip irrigation system.Poly Fitting Elbow, Drip Elbow, PP Fitting Elbow
    Send Inquiry
  5. VENTURY INJECTOR

    ADVANTAGE:- Highly resistant to most acids and alkalies Versatile and cost effective High tensile strength Light weight and rigid
    Send Inquiry
  6. Drip Fittings Tee

    The Drip Fittings tee is the one piece push in pipe fitting that allows fast and easy installation. The fitting can withstand high pressure conditions and ensure no leakage and pipe blow off.
    Send Inquiry
  7. Sprinkler End Plug

    Brand: GOKUL Dimension/Size: 8 MM Use: Agricultural
    Send Inquiry
  8. Drip Punch

    THE DRIPPER PUNCH PIN IS MAINLY USED IN PRECISING HOLE IN MAINLINE TUBING .
    Send Inquiry
  9. Dripper Plug

    RUST PROOF PERFECT FOR LOW WATER FLOW PRESSURE DIMENSIONAL ACCURACY HIGH DURABILITY
    Send Inquiry
  10. DRILL BIT

    Drill bits are cutting tools used to remove material to create holes, almost always of circular cross-section. Drill bits come in many sizes and shapes and can create different kinds of holes in many different materials.
    Send Inquiry
  11. PP Ring Take Off

    RESISTANT TO CORROSIVE FLUID/IMMUNE TOWARDS HIGH TEMPERATURE.SUITABLE FOR BOTH UNDERGROUND AND ABOVE THE GROUND INSTALLATION.
    Send Inquiry
  12. PP Air Release Valve

    Air in an irrigation system has to be controlled for a smooth operation as the presence or absence of air bubbles and air pockets can cause troubles and damage in the system. The Air Valves are firstly used for releasing the accumulated air, coming out of the solution from a pressurized pipeline. And secondly, the valve is used to allow the entry of air into the system in the situation of dropping internal pressure of the pipeline below atmospheric pressure.
    Send Inquiry
  13. PP DRIP ELBOW-(BLUE)

    The Drip Fittings Elbow is widely appreciated for their attractive attributes such as excellent finish, abrasion resistance and easy installation. Manufactured using graded PP material, these elbows are used for connecting pipes while installing the drip irrigation system.
    Send Inquiry
  14. PVC FLUSH VALVE

    PVC flush valve is an addition to your irrigation system. ... The main objectives of using this flush valve is to protect the water pipe and remove the unwanted material in the water pipe. Once the cap is removed, flush valve can flush all of them out while holding the crap.
    Send Inquiry
  15. PLASTIC SCREEN FILTER FFLANGED

    Efficiently removes impurities such as hard inorganic particulates sand, trash, scale, including trash, sand, silt, and other contaminants like algae, clog drip emitters and micro-sprinklers, helps increase efficiency of valves operation and results in overall significant increase in system efficiency leading to a excellent system performance.
    Send Inquiry
  16. PLASTIC DISC FILTER FLANGED

    Plastic Disc Filter is used as a primary filter for small irrigation systems and as a back-up filter for field zones. This filter can stop or retain large amount of solids from the water due to the depth and size of the disc element.
    Send Inquiry
  17. PLASTIC HYDROCLONE FILTER

    Hydrocyclone, Also known as sand separator, centrifugal filters are mainly for the removal of particles such as sand, and other solids from the irrigation water. They are ideal for situations where a pile of sand, is present in water.
    Send Inquiry
Contact Us

18, KUNJAD BAKROL ROAD, KUNJAD BAKROL ROAD, BAKROL, Ahmedabad Gujarat India +918037400123
Phone :+918037400123